Free!Horizontaldistance fromthe top tobottom is 1/4working heightBoth Rails of aNon-self-supportingladder will besupportedequallyLadders shall notbe loaded beyondmaximum load ormanufacturerscapacityLadders tobe used onstable, levelsurfacesDon't useladders onslipperysurfacesladders shouldnot be loadedbeyondmaximumintended loadLadder shallnot bemoved whenoccupiedArea aroundthe top andbottom ofladder shall bekept clearLadderused onlyfor purposedesignedfree of oil,grease, &other slippinghazzardsUser shouldface ladderwhenascending ordescendingside rails 3'beyondupperlandingsurfaceEmployee mustuse at least onehand to grasp theladder whenmoving up ordown the ladderladders that canbe displaced bywork activitiesshall besecuredUser should notcarry a loadthat will causethem to losebalance and fallFree!Horizontaldistance fromthe top tobottom is 1/4working heightBoth Rails of aNon-self-supportingladder will besupportedequallyLadders shall notbe loaded beyondmaximum load ormanufacturerscapacityLadders tobe used onstable, levelsurfacesDon't useladders onslipperysurfacesladders shouldnot be loadedbeyondmaximumintended loadLadder shallnot bemoved whenoccupiedArea aroundthe top andbottom ofladder shall bekept clearLadderused onlyfor purposedesignedfree of oil,grease, &other slippinghazzardsUser shouldface ladderwhenascending ordescendingside rails 3'beyondupperlandingsurfaceEmployee mustuse at least onehand to grasp theladder whenmoving up ordown the ladderladders that canbe displaced bywork activitiesshall besecuredUser should notcarry a loadthat will causethem to losebalance and fall

Ladder Safety Bingo - Call List

(Print) Use this randomly generated list as your call list when playing the game. There is no need to say the BINGO column name. Place some kind of mark (like an X, a checkmark, a dot, tally mark, etc) on each cell as you announce it, to keep track. You can also cut out each item, place them in a bag and pull words from the bag.


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
  1. Free!
  2. Horizontal distance from the top to bottom is 1/4 working height
  3. Both Rails of a Non-self-supporting ladder will be supported equally
  4. Ladders shall not be loaded beyond maximum load or manufacturers capacity
  5. Ladders to be used on stable, level surfaces
  6. Don't use ladders on slippery surfaces
  7. ladders should not be loaded beyond maximum intended load
  8. Ladder shall not be moved when occupied
  9. Area around the top and bottom of ladder shall be kept clear
  10. Ladder used only for purpose designed
  11. free of oil, grease, & other slipping hazzards
  12. User should face ladder when ascending or descending
  13. side rails 3' beyond upper landing surface
  14. Employee must use at least one hand to grasp the ladder when moving up or down the ladder
  15. ladders that can be displaced by work activities shall be secured
  16. User should not carry a load that will cause them to lose balance and fall