(Print) Use this randomly generated list as your call list when playing the game. There is no need to say the BINGO column name. Place some kind of mark (like an X, a checkmark, a dot, tally mark, etc) on each cell as you announce it, to keep track. You can also cut out each item, place them in a bag and pull words from the bag.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
Never run on plant floor
Never reach into moving machinery
Only trained personnel should enter a confined space
Keep walkways clear from obstructions
No artificial nails permitted on the production floor
Don’t modify machinery to bypass safety
Safety first before performing any job
Hairnets should always be worn in the finishing department
Use caution when pushing or pulling carts
Hepatitis shots are available to you at any time
Use safety guards to avoid injury
Use tools only for intended use
Forklift to be operated by trained personnel only
Don’t store items in front of electric panel boxes
Wipe down all work stations with disinfectant
Practice safe work habits
Safety is everyone’s job
Fall protection needed during scissor lift operation
Keep work area neat and orderly
Don’t store items in front of fire extinguishers
Exit the building immediately during fire drills
Don’t block emergency exits
Never climb on carts
Dry carts to avoid slip hazards
Be aware of possible hazards in work area
Daily forklift inspection checklist
Where is the nearest first aid kit located?
Avoid loose clothing that could get caught in moving machinery
Isolation gowns should be always worn in the soil department
Scissor lift to be operated by trained personnel only
Pick up strapping on floor to avoid trip hazards
Report water on floors to your supervisor to be cleaned up
Use safety googles for eye protection
Keep the area ventilated
Know machine operating procedures
Safety reference charts for safety equipment locations throughout plant
Follow machine operation procedures
Always wear required PPE
SDS sheets for chemical information
Know the location of your machine’s emergency stop switch
Report unsafe issues to supervisor or member of safety committee
Blue scrub tops should be always worn in the finishing department
Place sharps found in nearest sharps container
Lock out tag out machine to prevent accidental operation
Universal precautions
Authorized personnel only areas should be observed
Bump caps can prevent injury from overhead hazards
Pick up debris on floor to avoid injury
Lock out tag out machine to prevent accidental operation
Functional separation: keeping Soil and Finishing areas / products separate.
Watch for trip hazards
Use hearing protection to avoid damage to your hearing
No open toed shoes on production floor
No loose or dangling jewelry on the production floor
