SymmetryorconcentricityspecifiedBasicdimension for afeature withoutan associatedcontrol frameDatumfeature Gor beyondSizetoleranceapplied to aradius orchamferRunout orTotal Runouton a surfacethat doesn'tspinMulti linepositiontolerance wherecompositeshould be usedMMCmodifier on ahole thatestablisheslocationDatum featuresimulatorrepresentsmore thanone interfaceDatumfeaturetouchesair in assyTrue positionØ.005 (ormetricequivalent)MMBmodifierfor noreasonForm controlwith respectto a datumSize toleranceapplied tounopposedsurfacefeaturesAnotherbingo'd cellis also adatumfeatureLMBmodifierfor noreasonDatum featuresimulator is acorner whenthe matingpart is notPositiontoleranceapplied tofeaturewithout sizeTrue positionØ.010 (ormetricequivalent)LMCmodifierfor noreason"GD&T forthat willmake thepart moreexpensive"Datumdeclaredbut neverreferenced<CF>modifierused forcoplanarsurfacesMMCmodifier onthreadedfeatureOrder ofdatumprecedencechanges atleast onceSymmetryorconcentricityspecifiedBasicdimension for afeature withoutan associatedcontrol frameDatumfeature Gor beyondSizetoleranceapplied to aradius orchamferRunout orTotal Runouton a surfacethat doesn'tspinMulti linepositiontolerance wherecompositeshould be usedMMCmodifier on ahole thatestablisheslocationDatum featuresimulatorrepresentsmore thanone interfaceDatumfeaturetouchesair in assyTrue positionØ.005 (ormetricequivalent)MMBmodifierfor noreasonForm controlwith respectto a datumSize toleranceapplied tounopposedsurfacefeaturesAnotherbingo'd cellis also adatumfeatureLMBmodifierfor noreasonDatum featuresimulator is acorner whenthe matingpart is notPositiontoleranceapplied tofeaturewithout sizeTrue positionØ.010 (ormetricequivalent)LMCmodifierfor noreason"GD&T forthat willmake thepart moreexpensive"Datumdeclaredbut neverreferenced<CF>modifierused forcoplanarsurfacesMMCmodifier onthreadedfeatureOrder ofdatumprecedencechanges atleast once

GD&T Bingo! - Call List

(Print) Use this randomly generated list as your call list when playing the game. There is no need to say the BINGO column name. Place some kind of mark (like an X, a checkmark, a dot, tally mark, etc) on each cell as you announce it, to keep track. You can also cut out each item, place them in a bag and pull words from the bag.


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
  1. Symmetry or concentricity specified
  2. Basic dimension for a feature without an associated control frame
  3. Datum feature G or beyond
  4. Size tolerance applied to a radius or chamfer
  5. Runout or Total Runout on a surface that doesn't spin
  6. Multi line position tolerance where composite should be used
  7. MMC modifier on a hole that establishes location
  8. Datum feature simulator represents more than one interface
  9. Datum feature touches air in assy
  10. True position Ø.005 (or metric equivalent)
  11. MMB modifier for no reason
  12. Form control with respect to a datum
  13. Size tolerance applied to unopposed surface features
  14. Another bingo'd cell is also a datum feature
  15. LMB modifier for no reason
  16. Datum feature simulator is a corner when the mating part is not
  17. Position tolerance applied to feature without size
  18. True position Ø.010 (or metric equivalent)
  19. LMC modifier for no reason
  20. "GD&T for that will make the part more expensive"
  21. Datum declared but never referenced
  22. <CF> modifier used for coplanar surfaces
  23. MMC modifier on threaded feature
  24. Order of datum precedence changes at least once