Welding - Call List

(Print) Use this randomly generated list as your call list when playing the game. There is no need to say the BINGO column name. Place some kind of mark (like an X, a checkmark, a dot, tally mark, etc) on each cell as you announce it, to keep track. You can also cut out each item, place them in a bag and pull words from the bag.

1. Must be worn at all times when in the shop/lab area?
   
2. What does the G in 2G stand for?
   Groove
3. What side is on the bottom of the reference line?
   Arrow side
4. What is the maximum arc length when stick welding?
   Diameter of the welding rod
5. What welding process uses a Tungsten Electrode?
   TIG
6. Another term for keeping a clean work area?
   House Keeping
7. What shade lens is recommended for Oxy Fuel Cutting?
   5
8. Symbol for a Fillet weld?
   
9. Symbol for a J Bevel Groove?
   
10. PPE that protects the hands
    
11. What connects the wire to the power source?
    Contact Tip
12. Symbol for a Single Bevel Groove?
    
13. Closed Toe work boots/shoes
14. What side is on the top of the reference arrow?
    Other side
15. When working what should you check for before starting and welding or cutting operations?
    Flammable and compostable material
16. Most common workplace accident?
    Slips, Trips, and Falls
17. What number does the the fraction 8/16 reduce to?
    1/2
18. How many minutes does an average duty cycle pertain to?
    10 min
19. What helps direct the gas to the weld puddle?
    Nozzle
20. PPE that protects Hair and head from sparks?
    
21. PPE that helps reduce noise and keep sparks out of ear canal?
    
22. What does the fraction 12/16 reduce to?
    3/4
23. Recommended Shade for Plasma Air Arc Cutting?
    8
24. PPE for eyes and face protection while welding?
    
25. Other than the welding torch what do you need to complete the circuit when welding?
    Ground Clamp
26. Maximum distance of stick out when FCAW?
    5/8" to 1"